Low loader semitrailerFAYMONVILLE
MAX Trailer 3+5 Tiefbett (Baggerbett)
Low loader semitrailer
FAYMONVILLE
MAX Trailer 3+5 Tiefbett (Baggerbett)
État
Neuf
Emplacement
Essen 

Données de base
Prix et localisation
- Lieu du vendeur:
- HeegstraĂźe 6-8, 45356 Essen, Allemagne

Appel
Détails techniques
Dimensions et poids
Poids total:
126 000 kg
Poids maximal de charge:
92 045 kg
Essieux et roues
Configuration d'essieux:
3 essieux
Dispositifs de sécurité
ABS
Détails sur l'offre
- Identifiant de l'annonce:
- A227-14-507
- Numéro de référence:
- 38171
- Mise Ă jour:
- dernière mise à jour le 12.09.2026
Description
Excerpt from the equipment list
Complete equipment upon request
* 1 x Gooseneck MAX710-Neck-V-30-2.70
* Gooseneck with hydraulic lifting/lowering and extendable function
* Length approx. 3,650 mm. For SZM 6x4 or 8x4
* Steel front panel, approx. 400 mm high
* Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish
* 3.5-inch kingpin
* Truck hydraulic connection with flow control (20 l/min)
* Incl. gantry for suspending the supply lines
* The SZM tank must contain at least 80 l with MAX trailer couplings, otherwise the customer must provide the couplings ex works
* BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2
* TPMS tire pressure monitoring system
* Two toolboxes INOX, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg)
* 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
* Hydraulic connection lines between the power pack and the connection plate on the gooseneck
* Radio remote control: operation of the power pack, start/stop of the diesel engine
* Operation of the trailing axle, in addition to the cable remote control
* with 2 LED indicator lights on the receiver for single-lane operation
* Operation of raising/lowering the gooseneck
* Operation of raising/lowering the suspension of the axle assemblies
* Multicoupling hydraulic connections on the gooseneck
* 1 LED work light, left and right, on the rear panel of the gooseneck, with separate on/off switch
* Four warning boards, extendable by ± 2,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting for a rotating beacon. (± 122 kg)
* 1 x 3-axle compact front axle
* MAX710 axle PA-F-3-19.5-1.36-2.85
* Hook connection at the front and rear
* Length: approx. 3,560 mm
* Axle width: approx. 2,850 mm
* Front axle with a separate air connection for air suspension
* BEKA-MAX central lubrication system for a 3-axle axle assembly with standard grease NLGI-2.
* A 7-pole socket, left and right, at the rear of the front axle for the warning boards
* TPMS tire pressure monitoring system according to ECE R 1411
* LED work lights, left and right, at the rear of the front axle with a separate on/off switch
* Surface of the front axle with a sand-coated paint finish for slip resistance
* Multicoupling hydraulic connections on the front axle
* 1 x Low loader bridge: MAX710-Low-loader-BB-A-7.15-(430)-2.85
* Telescopic low loader bridge BB-A with drivable bridge hooks at the front and a bolt-on coupling at the rear
Cjdpfx Aezzhfnoh Ssri
* Basic width: approx. 2,850 mm Length: approx. 7,150 mm
* Beam height: approx. 430 mm Beam width: approx. 1,350 mm
* Loading height approx. 580 mm with ground clearance approx. 150 mm
* 6 pairs of steel chequered plate with rubber matting approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg)
* Possibility to screw in (ø approx. 40 mm) every approx. 500 mm on the outside of the top chord of the outer tube of the low loader bridge for screw rings (LC 16,000 daN)
* Possibility to screw in M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the low loader bridge for mounting screw rings (LC 10,000 daN)
* Folding widening extensions with steel chequered plate, adjustable in width from approx. 2,850 mm to approx. 3,250 mm
* TPMS tire pressure monitoring system
* Pair of loose HeProLen plastic wheel chocks with climbing strips approx. 1,200 x 450 x 50/400 mm. (± 130 kg)
* 2 pairs of screwable lashing rings M30 (LC 12,000 daN). (± 13 kg)
* Ce
L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.
Complete equipment upon request
* 1 x Gooseneck MAX710-Neck-V-30-2.70
* Gooseneck with hydraulic lifting/lowering and extendable function
* Length approx. 3,650 mm. For SZM 6x4 or 8x4
* Steel front panel, approx. 400 mm high
* Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish
* 3.5-inch kingpin
* Truck hydraulic connection with flow control (20 l/min)
* Incl. gantry for suspending the supply lines
* The SZM tank must contain at least 80 l with MAX trailer couplings, otherwise the customer must provide the couplings ex works
* BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2
* TPMS tire pressure monitoring system
* Two toolboxes INOX, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg)
* 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
* Hydraulic connection lines between the power pack and the connection plate on the gooseneck
* Radio remote control: operation of the power pack, start/stop of the diesel engine
* Operation of the trailing axle, in addition to the cable remote control
* with 2 LED indicator lights on the receiver for single-lane operation
* Operation of raising/lowering the gooseneck
* Operation of raising/lowering the suspension of the axle assemblies
* Multicoupling hydraulic connections on the gooseneck
* 1 LED work light, left and right, on the rear panel of the gooseneck, with separate on/off switch
* Four warning boards, extendable by ± 2,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting for a rotating beacon. (± 122 kg)
* 1 x 3-axle compact front axle
* MAX710 axle PA-F-3-19.5-1.36-2.85
* Hook connection at the front and rear
* Length: approx. 3,560 mm
* Axle width: approx. 2,850 mm
* Front axle with a separate air connection for air suspension
* BEKA-MAX central lubrication system for a 3-axle axle assembly with standard grease NLGI-2.
* A 7-pole socket, left and right, at the rear of the front axle for the warning boards
* TPMS tire pressure monitoring system according to ECE R 1411
* LED work lights, left and right, at the rear of the front axle with a separate on/off switch
* Surface of the front axle with a sand-coated paint finish for slip resistance
* Multicoupling hydraulic connections on the front axle
* 1 x Low loader bridge: MAX710-Low-loader-BB-A-7.15-(430)-2.85
* Telescopic low loader bridge BB-A with drivable bridge hooks at the front and a bolt-on coupling at the rear
Cjdpfx Aezzhfnoh Ssri
* Basic width: approx. 2,850 mm Length: approx. 7,150 mm
* Beam height: approx. 430 mm Beam width: approx. 1,350 mm
* Loading height approx. 580 mm with ground clearance approx. 150 mm
* 6 pairs of steel chequered plate with rubber matting approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg)
* Possibility to screw in (ø approx. 40 mm) every approx. 500 mm on the outside of the top chord of the outer tube of the low loader bridge for screw rings (LC 16,000 daN)
* Possibility to screw in M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the low loader bridge for mounting screw rings (LC 10,000 daN)
* Folding widening extensions with steel chequered plate, adjustable in width from approx. 2,850 mm to approx. 3,250 mm
* TPMS tire pressure monitoring system
* Pair of loose HeProLen plastic wheel chocks with climbing strips approx. 1,200 x 450 x 50/400 mm. (± 130 kg)
* 2 pairs of screwable lashing rings M30 (LC 12,000 daN). (± 13 kg)
* Ce
L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.
Fournisseur
Remarque : Inscrivez-vous gratuitement ou connectez-vous, pour accéder à toutes les informations.
Enregistré depuis: 2003
62 annonces en ligne
Envoyer une demande
Téléphone & Fax
+49 201 8... afficher
Ces annonces pourraient également vous intéresser.
Réussite :
Votre message a été envoyé.
Annonce
Gilze
121 km
Faymonville STBZ-5VA + Dolly Ă avant-train 3 essieux / Extensible / Col de cygne amovible
FaymonvilleSTBZ-5VA + 3 AXLE JEEP DOLLY / EXTENDABLE / REM...
FaymonvilleSTBZ-5VA + 3 AXLE JEEP DOLLY / EXTENDABLE / REM...
Réussite :
Votre message a été envoyé.
Annonce
Andelst
179 km
Chargeur bas
GoldhoferSTHP/XLE 8 (3+5) VESSEL-CARRIER/KETEL-BED /KESS...
GoldhoferSTHP/XLE 8 (3+5) VESSEL-CARRIER/KETEL-BED /KESS...
Réussite :
Votre message a été envoyé.
Annonce
Raalte
244 km
Volvo FH 16.750 8x4/4
VolvoFH 16.750 8x4/4
VolvoFH 16.750 8x4/4
Réussite :
Votre message a été envoyé.
Annonce
Raalte
244 km
Chargeur bas
GoldhoferTHP XLE 8 (3+5)
GoldhoferTHP XLE 8 (3+5)
Réussite :
Votre message a été envoyé.
Annonce
Saarlouis
210 km
Metso Lokotrack LT 200 HP
MetsoLokotrack LT 200 HP
MetsoLokotrack LT 200 HP
Réussite :
Votre message a été envoyé.
Annonce
Geleen
108 km
Camion poids lourd
MERCEDES-BENZActros 4158 8x4 Schwerlast
MERCEDES-BENZActros 4158 8x4 Schwerlast
Réussite :
Votre message a été envoyé.
Annonce
Landsberg
536 km
Remorque surbaissée
FAYMONVILLEMulti-Z-8H-W-A-30AT-15.00-17.5-2.99-gk.A-Schien
FAYMONVILLEMulti-Z-8H-W-A-30AT-15.00-17.5-2.99-gk.A-Schien
Réussite :
Votre message a été envoyé.
Annonce
Petershagen
371 km
Remorque surbaissée
KÄSSBOHRERK.SLA R 4 / 2N 18/40 Tieflader Radmulden tele
KÄSSBOHRERK.SLA R 4 / 2N 18/40 Tieflader Radmulden tele
Réussite :
Votre message a été envoyé.
Annonce
Saarlouis
210 km
Metso Nordberg Lokotrack LT 1415
MetsoNordberg Lokotrack LT 1415
MetsoNordberg Lokotrack LT 1415
Réussite :
Votre message a été envoyé.
Annonce
Illkirch
323 km
Camion-benne articulé
Caterpillar730C2
Caterpillar730C2
Votre annonce a été supprimée
Une erreur est survenue

































































































































































































































