Walking floor semitrailerSTAS
13.50 bioSTAR mit VBK E-Powerplans 93m³
Walking floor semitrailer
STAS
13.50 bioSTAR mit VBK E-Powerplans 93m³
État
Neuf
Emplacement
Korschenbroich-Glehn 

Données de base
Prix et localisation
- Lieu du vendeur:
- Dieselstr. 9, 41352 Korschenbroich-Glehn, Allemagne

Appel
Détails techniques
Dimensions et poids
Volume de l'espace de chargement:
93 m³
Longueur de l'espace de chargement:
13 535 mm
Largeur de l’espace de chargement:
2 480 mm
Hauteur de l'espace de chargement:
2 650 mm
Essieux et roues
Configuration d'essieux:
3 essieux
Détails sur l'offre
- Identifiant de l'annonce:
- A211-98-535
- Mise à jour:
- dernière mise à jour le 10.02.2026
Description
Chassis
Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and
strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg)
Axles and suspension "Disc brake 22.5"
Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable)
Tires and wheels
6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120
Seatposts
mechanical support winches with two speeds, 2x 20 ton support load with swivel foot,
Braking system
according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system,
Bsdpfx Ahjyh S Aiodslp
electrical system
according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection
Structure/trough "structure fully welded inside"
reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn
Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load
approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards
Hydraulic system "Cargo - Floor" sliding floor system
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses
Accessories
6 PV
L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.
Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and
strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg)
Axles and suspension "Disc brake 22.5"
Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable)
Tires and wheels
6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120
Seatposts
mechanical support winches with two speeds, 2x 20 ton support load with swivel foot,
Braking system
according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system,
Bsdpfx Ahjyh S Aiodslp
electrical system
according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection
Structure/trough "structure fully welded inside"
reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn
Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load
approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards
Hydraulic system "Cargo - Floor" sliding floor system
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses
Accessories
6 PV
L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.
Fournisseur
Remarque : Inscrivez-vous gratuitement ou connectez-vous, pour accéder à toutes les informations.
Enregistré depuis: 2002
16 annonces en ligne
Envoyer une demande
Téléphone & Fax
+49 2182 ... afficher
Ces annonces pourraient également vous intéresser.
Réussite :
Votre message a été envoyé.
Annonce
Bottrop
210 km
Tracteur routier standard
SCANIAR 580 V8 SZM TOPLINE mit Hydrl. Pumpe 6x4
SCANIAR 580 V8 SZM TOPLINE mit Hydrl. Pumpe 6x4
Réussite :
Votre message a été envoyé.
Annonce
Ennigerloh
288 km
Camion à carrosserie sur mesure
Mercedes-BenzActros 2553L Schubboden Komplett möglich | Hydrodrive 4x4x2
Mercedes-BenzActros 2553L Schubboden Komplett möglich | Hydrodrive 4x4x2
Réussite :
Votre message a été envoyé.
Annonce
Weilerswist
171 km
Fond mouvant
Knapen
Knapen
Réussite :
Votre message a été envoyé.
Annonce
Jestetten
437 km
MAN TGS 35.440 8x4H*6 Spitzer GHH de 2016
MANTGS 35.440 8X4H-6 Spitzer GHH
MANTGS 35.440 8X4H-6 Spitzer GHH
Réussite :
Votre message a été envoyé.
Annonce
Lübbecke
353 km
Wielton 55 Kubik Alumulde
Wielton55 Kubik Alumulde
Wielton55 Kubik Alumulde
Réussite :
Votre message a été envoyé.
Annonce
Datteln
237 km
Fourgon surélevé
MERCEDES-BENZSprinter 314/316 CDI Maxi*AHK=3.500Kg*Garantie*
MERCEDES-BENZSprinter 314/316 CDI Maxi*AHK=3.500Kg*Garantie*
Réussite :
Votre message a été envoyé.
Annonce
Ennigerloh
288 km
Semi-remorque à plancher roulant
KnapenKT01 Voll fahrbereit leichter Brandschaden, Boden ok
KnapenKT01 Voll fahrbereit leichter Brandschaden, Boden ok
Réussite :
Votre message a été envoyé.
Annonce
Ennigerloh
288 km
Semi-remorque
KrakerCF-Z Schubboden Liftachse SAF Achsen
KrakerCF-Z Schubboden Liftachse SAF Achsen
Réussite :
Votre message a été envoyé.
Annonce
Ennigerloh
288 km
Tracteur routier standard
Mercedes-Benz1843 Topzustand einsatzbereit, Motor nur 150 tkm
Mercedes-Benz1843 Topzustand einsatzbereit, Motor nur 150 tkm
Réussite :
Votre message a été envoyé.
Annonce
Datteln
237 km
Fourgon surélevé
MERCEDES-BENZSprinter 313/316 CDI Maxi*AHK=3.500Kg*Garantie*
MERCEDES-BENZSprinter 313/316 CDI Maxi*AHK=3.500Kg*Garantie*
Votre annonce a été supprimée
Une erreur est survenue








































































































































































