Low loader trailerMÜLLER-MITTELTAL
Etütar 14,4 verkürzte Bordwände, LED Rundum
Low loader trailer
MÜLLER-MITTELTAL
Etütar 14,4 verkürzte Bordwände, LED Rundum
Prix fixe hors TVA
29 250 €
(34 808 € brut)
État
Neuf
Emplacement
Alsdorf 

Données de base
Prix et localisation
Prix fixe hors TVA
29 250 €
(34 808 € brut)
- Lieu du vendeur:
- Carl - Zeiss - Straße 26, 52477 Alsdorf, Allemagne

Appel
Détails techniques
Dimensions et poids
Poids total:
14 400 kg
Poids maximal de charge:
10 880 kg
Longueur de l'espace de chargement:
6 270 mm
Largeur de l’espace de chargement:
2 470 mm
Hauteur de l'espace de chargement:
400 mm
Essieux et roues
Configuration d'essieux:
2 essieux
Dispositifs de sécurité
ABS
Détails sur l'offre
- Identifiant de l'annonce:
- A232-23-586
- Numéro de référence:
- 11732
- Mise à jour:
- dernière mise à jour le 30.10.2026
Description
* Müller Mitteltal ETÜ-TA-R 14.4 Low-loader, drive-over design with shortened side walls
* Also ideal for use as a platform – as the stanchions can be quickly removed and the side walls can be locked in place
* RAL 7035 light grey
* GVW: 14.4 t, payload: 10.88 t
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Unladen floor height 930 mm / laden floor height 870 mm
* Chassis, front panel, ramps, drawbar: hot-dip galvanized
* Wooden floor in a clamped design
* 4 UVV-compliant lashing eyes (LC 6300 daN)
* Perforated outer frame, 45° bent, with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN with a minimum spacing of 480 mm.
* 10 UVV-compliant lashing eyes LC 3000 daN, recessed in the existing hole pattern in the outer frame
* Ramps, one-piece, with hot-dip galvanized grating in a non-slip design, can be slid together to approximately 20 mm
* Side walls in special design, shortened to just before the rear slope with folding and removable rear stanchions
* Locking of the folded-down side walls – making it easy to use as a platform
* Ramp securing system with retaining bar and diagonal support
* Ramp lifter with vertically positioned, adjustable springs for easy single-person operation
* Rear panel 300 mm, aluminum, plug-in design
* 1 toolbox in front of the front panel
* Excavator bucket rest made of hardwood, screwed onto the front panel
* 2 additional LED reversing lights
* 1 removable rotating LED warning light at the rear
* Height-adjustable support jacks at the front, folding supports at the rear
* Drawbar with 40 mm tow hitch, height-adjustable; 50 mm hitch also available on request
* In front of the front panel, device for the subsequent installation of 2 containers – locking mechanisms
* ----Leasing, hire purchase, financing, trade-in possible
* e.g. €585 net with a term of 60 months
* We have been a Müller Mitteltal sales partner for over 10 years
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside of opening hours, we are available by appointment
Bwjdpo Af Dlcsfx Aqljw
We speak German, we speak English, mowimy po polsku, on parle français.
L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.
* Also ideal for use as a platform – as the stanchions can be quickly removed and the side walls can be locked in place
* RAL 7035 light grey
* GVW: 14.4 t, payload: 10.88 t
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Unladen floor height 930 mm / laden floor height 870 mm
* Chassis, front panel, ramps, drawbar: hot-dip galvanized
* Wooden floor in a clamped design
* 4 UVV-compliant lashing eyes (LC 6300 daN)
* Perforated outer frame, 45° bent, with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN with a minimum spacing of 480 mm.
* 10 UVV-compliant lashing eyes LC 3000 daN, recessed in the existing hole pattern in the outer frame
* Ramps, one-piece, with hot-dip galvanized grating in a non-slip design, can be slid together to approximately 20 mm
* Side walls in special design, shortened to just before the rear slope with folding and removable rear stanchions
* Locking of the folded-down side walls – making it easy to use as a platform
* Ramp securing system with retaining bar and diagonal support
* Ramp lifter with vertically positioned, adjustable springs for easy single-person operation
* Rear panel 300 mm, aluminum, plug-in design
* 1 toolbox in front of the front panel
* Excavator bucket rest made of hardwood, screwed onto the front panel
* 2 additional LED reversing lights
* 1 removable rotating LED warning light at the rear
* Height-adjustable support jacks at the front, folding supports at the rear
* Drawbar with 40 mm tow hitch, height-adjustable; 50 mm hitch also available on request
* In front of the front panel, device for the subsequent installation of 2 containers – locking mechanisms
* ----Leasing, hire purchase, financing, trade-in possible
* e.g. €585 net with a term of 60 months
* We have been a Müller Mitteltal sales partner for over 10 years
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside of opening hours, we are available by appointment
Bwjdpo Af Dlcsfx Aqljw
We speak German, we speak English, mowimy po polsku, on parle français.
L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.
Fournisseur
Remarque : Inscrivez-vous gratuitement ou connectez-vous, pour accéder à toutes les informations.
Enregistré depuis: 2001
27 annonces en ligne
Envoyer une demande
Téléphone & Fax
+49 2404 ... afficher
Votre annonce a été supprimée
Une erreur est survenue


























































