Low loader trailerMÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Low loader trailer
MÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Prix fixe hors TVA
29 900 €
(35 581 € brut)
Année de construction
2025
État
Neuf
Emplacement
Egestorf 

Données de base
- Désignation:
- Low loader trailer
- Fabricant:
- MÜLLER-MITTELTAL
- Année de construction:
- 2025
- État:
- nouveau
Prix et localisation
Prix fixe hors TVA
29 900 €
(35 581 € brut)
- Lieu du vendeur:
- Eichenstich 12, 21272 Egestorf, Allemagne

Appel
Détails techniques
Dimensions et poids
Poids total:
14 400 kg
Poids maximal de charge:
10 900 kg
Longueur de l'espace de chargement:
6 270 mm
Largeur de l’espace de chargement:
2 470 mm
Hauteur de l'espace de chargement:
400 mm
Essieux et roues
Configuration d'essieux:
2 essieux
Détails sur l'offre
- Identifiant de l'annonce:
- A128-69-180
- Numéro de référence:
- 6158
- Mise à jour:
- dernière mise à jour le 11.06.2026
Description
ETÜ-TA-R 14.4
----Brakes:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flanged Towing Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flanged towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General Accessories:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized foldable rear supports
* Plastic toolbox mounted front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation for the retrofit of container locks in front of the front wall
* Bolted smooth steel front wall
* Fold-down sidewalls made from trapezoidal steel sheeting with board hoist
* Steel rear wall can be inserted between the ramp mounts and stowed inside in front of the front wall when not in use
* Bolted rear stakes
* Rear slope approx. 860 mm
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t drop lashing rings every 600 mm
* One 6.3 t lashing ring in each of the front and rear corners
* Various 1.2 t lashing options in the front and rear cross-members
----Ramps:
* Single-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be telescoped to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps
* Sideboard color in RAL 9010 pure white
* Sidewall painting in another RAL color available at extra cost
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
Blodpfx Ajpk Dv Rohdsp
* Available immediately ex works Egestorf
L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.
----Brakes:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flanged Towing Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flanged towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General Accessories:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized foldable rear supports
* Plastic toolbox mounted front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation for the retrofit of container locks in front of the front wall
* Bolted smooth steel front wall
* Fold-down sidewalls made from trapezoidal steel sheeting with board hoist
* Steel rear wall can be inserted between the ramp mounts and stowed inside in front of the front wall when not in use
* Bolted rear stakes
* Rear slope approx. 860 mm
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t drop lashing rings every 600 mm
* One 6.3 t lashing ring in each of the front and rear corners
* Various 1.2 t lashing options in the front and rear cross-members
----Ramps:
* Single-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be telescoped to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps
* Sideboard color in RAL 9010 pure white
* Sidewall painting in another RAL color available at extra cost
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
Blodpfx Ajpk Dv Rohdsp
* Available immediately ex works Egestorf
L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.
Fournisseur
Remarque : Inscrivez-vous gratuitement ou connectez-vous, pour accéder à toutes les informations.
Enregistré depuis: 2001
165 annonces en ligne
Envoyer une demande
Téléphone & Fax
+49 40 33... afficher
Ces annonces pourraient également vous intéresser.
Réussite :
Votre message a été envoyé.
Annonce
Egestorf
488 km
Remorque avec plate-forme de travail
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Votre annonce a été supprimée
Une erreur est survenue
























































