Wheel loader

ATLAS Weycor AR560 Radlader Schaufel + Palettengabel

SN: 208

Atlas Weycor AR560 wheel loader, Z-kinematics / 3rd control section with screw couplings
Electric switching system for attachments / Hydraulic quick coupler / 100% differential lock
Rear-view camera / Extended lifting arm - High Lift / Reversing fan / Hydrostatic drive ---->>>>> 1x light material bucket approx. 2.7 m³ / 1x pallet fork approx. 1,600mm tine length >>>>>
----- Tires: MICHELIN X - Mine 15.5R25 -----
Deutz diesel engine TCD 3.6 L04 95 kW / 129 hp
EU emission stage V exhaust gas aftertreatment system DOC, SCR & DPF

Atlas Weycor AR560 wheel loader:

Operating weight: 8,250 kg,

Hydrostatic drive,

Speed 20 km/h,

Road traffic regulations (StVZO) lighting,

Z-kinematics with hydraulic quick coupler,

Extended lifting arm (High Lift),

3rd control section with screw couplings, electric switching system for attachments,

2x work lights rear top on cabin,

2x work lights front top on cabin,

Tow hitch rear,

100% differential lock can be engaged in front and rear axles,

Cyclonic pre-cleaner TURBO II,

Rotating beacon LED,

Single-lever operation via Weycor joystick with knurled wheel and rocker switch,

Rear-view camera,

Rear warning alarm (acoustic),

Reversing fan,

Radio preparation,

Folding sun visor front,

Heated rear window,

Windshield and rear window wipers,

Full cabin with door on the right and left,

Grammer comfort seat - air-sprung with long backrest,

Parking brake electric,

Tires: MICHELIN X - Mine 15.5R25,

Dimensions without bucket LxWxH: 6,000 x 2,220 x 3,070 mm,

A.f.B. - Light material bucket:
Width: 2,500 mm,
Capacity: approx. 2.7 m³,
For specific bulk material weight: 0.6 - 0.8 tons/m³,
Weight: approx. 1,010 kg,
Year of manufacture: 11/2021,
With long, straight bucket floor,
With straight, closed side cutters,
With wear rails on the floor lengthwise,
Additionally with cutting edge on the floor - undercutting knife,
With additional overflow plate approx. 400 mm high, designed as a perforated sheet

Pallet fork:
Tine dimensions LxWxH: 1,600 x 130 x 60 mm,
Fork carrier width: 1,400 mm

Engine:
Type: Deutz diesel engine TCD 3.6 L04,
Power: 95 kW (129.2 hp) at 2,200 rpm,
Max. torque: 480 Nm at 1,600 rpm,
Displacement: 3,620 m³,
Number of cylinders: 4 in line,
Design: Water-cooled,
Emission stage: EU Stage V,
Exhaust gas aftertreatment system DOC, SCR & diesel particulate filter (DPF),
AdBlue

Electrical system:
Battery voltage: 12 V,
Battery: 12V / 100Ah,
Generator: 14V / 95A,
Starter: 12V / 4kW

Additional features:
Comfort seat - air-sprung with long backrest,
Dsdpoz El D Hefx Al Nskw
Boom damping,
Tilting valve for working cylinder,
Reversing warning buzzer,
Protective grid for intake area,
Cyclonic pre-cleaner TURBO II,
Preparation for mounting rotating beacon incl. cable harness, switch and socket,
Rotating beacon in LED design,
Preparation for radio installation complete, without radio, incl. speakers and antenna,
Extended lifting arm / Dimension C2: +220mm / Dimension E: +170mm, / Payload loss: approx. 20%,
Reversing fan,
Rear-view camera including monitor in the driver's cab

Standard equipment:
Hydrostatic drive with automatic control, 2-position travel motor switchable under load,
Speed 20 km/h,
100% differential lock can be engaged in front and rear axles,
Articulated frame steering, articulated pendulum joint, planetary axles, all-wheel drive,
Oil-bath multi-disc brake with spring-applied function,
Z-kinematics with hydraulic quick coupler,
3rd control section with screw couplings, electric switching system for

L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.